ABB has temporarily suspended its stock drive program. Please call us at 248-837-7000 or email sales@michiganair.com for availability.
You have no items in your shopping cart.
Menu
Picture of Centrifugal Upblast Exhaust Fan, Model CUBE-099, Belt Drive, 1/4HP, 115V, 1Ph, 759-1260 CFM
Picture of Centrifugal Upblast Exhaust Fan, Model CUBE-099, Belt Drive, 1/4HP, 115V, 1Ph, 759-1260 CFM Picture of Centrifugal Upblast Exhaust Fan, Model CUBE-099, Belt Drive, 1/4HP, 115V, 1Ph, 759-1260 CFM Picture of Centrifugal Upblast Exhaust Fan, Model CUBE-099, Belt Drive, 1/4HP, 115V, 1Ph, 759-1260 CFM Picture of Centrifugal Upblast Exhaust Fan, Model CUBE-099, Belt Drive, 1/4HP, 115V, 1Ph, 759-1260 CFM Picture of Centrifugal Upblast Exhaust Fan, Model CUBE-099, Belt Drive, 1/4HP, 115V, 1Ph, 759-1260 CFM

Centrifugal Upblast Exhaust Fan, Model CUBE-099, Belt Drive, 1/4HP, 115V, 1Ph, 759-1260 CFM

Model CUBE Centrifugal Roof Exhaust fans are belt driven. These fans are specifically designed for roof mounted applications. Exhaust air is discharged directly upward, away from the roof surface. Fan wheels are centrifugal, backward inclined, and constructed of aluminum. Adjustable motor pulleys allow for final system balancing. All model CUBE fans stocked at Michigan Air Products bear the UL-762 label, approved for use in commercial kitchen applications. Fans are stocked with 115/1Ø motor with thermal overloads. Motors can be easily changed to 3Ø with advance notice. Roof curb required for new roof installations (see related products below).
Be the first to review this product
Manufacturer: Greenheck Fan Corporation
Availability:  3 in Troy
SKU: CUBE0994
$1,900.00

Product # CUBE-099-4G has been replaced with CUBE-099-4119. The product change is in name only. Form, fit and function remain the same.

  • Windband is continually welded to the curb cap and drain trough for leakproof construction
  • Centrifugal wheel provides high-efficiency and minimal sound
  • One-piece aluminum windband with rolled bead provides extra rigidity
  • Cooling fins located on top of fan wheel draw outside air through a large breather tube directly into the motor compartment extending motor life
  • Wall or roof mountable

Certifications:

  • AMCA Sound & Air
  • High Wind and Hurricane
  • Seismic
  • UL/cUL 762

DOCUMENTS

Catalog

Installation, Operation and Maintenance Manual

 

Products specifications
Attribute name Attribute value
Base/Panel Length X Width 19 x 19 in
Curb Cap Size 19 in
Impeller Diameter 11 3/8 in
Roof Opening Width x Roof Opening Length 14 1/2 x 14 1/2 in
Base Height 1 3/4 in
Bearing Size 3/4 in
Height 28 1/4 in
Weight 69 lbs
Damper Width x Damper Height 12 x 12 in
Overall Diameter 24 7/8 in
CFM Range 759-1260
FRPM Range 1285-1725
Mounting Location Roof, Wall
Drive Type Belt Drive
Impeller Type Centrifugal Wheel
Impeller Material Aluminum
Housing Material Spun Aluminum
Max Inlet Temp 400 °F
Warranty Length 1 Year
Related products
Picture of Backdraft damper, horizontal mount, Model WD-100, 12 In Sq, No Flange, Performance up to 2,500 ft/min

Backdraft damper, horizontal mount, Model WD-100, 12 In Sq, No Flange, Performance up to 2,500 ft/min

Availability:  31 in Troy
The WD-100 series are horizontally mounted backdraft dampers designed to allow vertical airflow up and prevent reverse airflow. The dampers are opened by air pressure differential (assisted by springs) and closed by gravity. The damper features a flangeless, galvanized steel frame and aluminum blades. Width and height furnished approximately 0.125 in. under size
$170.00
Picture of Roof Curb for 19 In. Square Base, 18 In. High

Roof Curb for 19 In. Square Base, 18 In. High

Availability:  43 in Troy
GPI roof curbs are designed for flat, insulated or non-insulated roof decks. Constructed of 18 gauge galvanized steel and fully formed on three sides with a single, fully welded seam.
$238.00
Picture of Vented Curb Extension, 19 In. Square Base for Model CUBE

Vented Curb Extension, 19 In. Square Base for Model CUBE

Availability:  1 in stock
A curb extension featuring vents along each side. Typically used in a kitchen application with a non-vented curb to provide an installation in accordance with NFPA 96. Model VCE consists of galvanized steel or welded aluminum.
$688.00
Picture of Hinge Curb Kit with Cables, For use with Models CUBE 099-200

Hinge Curb Kit with Cables, For use with Models CUBE 099-200

Availability:  5 in Troy
Hinge kit allows the fan to hinge at the base of the curb cap for access to the wheel and ductwork for inspection and cleaning.
$172.00

Locations in Grand Rapids, Troy, and Saginaw

Contact Us
ABB HVAC Variable Speed Drives ABB HVAC Variable Speed Drives
Price Industries Price Industries
Greenheck Fan Corporation Greenheck Fan Corporation
Information
Customer service
Copyright © 2023 Michigan Air Products. All rights reserved.
1185 Equity Drive, Troy, MI 48084